Vintage Kraft Jewelry Box for Earring Bracelet Pendant
Vintage Kraft Jewelry Box for Earring Bracelet Pendant
Vintage Kraft Jewelry Box for Earring Bracelet Pendant
Vintage Kraft Jewelry Box for Earring Bracelet Pendant
Vintage Kraft Jewelry Box for Earring Bracelet Pendant
Vintage Kraft Jewelry Box for Earring Bracelet Pendant

Vintage Kraft Jewelry Box for Earring Bracelet Pendant

An earring dropped into a box with nothing inside rattles 關於, so this box is lined with a velvet foam tray and a slot is cut for each piece. The pile of the foam sits between the metal and the board, so a ring rests on the soft face and not on paper. The lid is a full cover and it goes over the base on four sides, so the two edges meet in one line when it is closed. The body is hardboard wrapped in coated paper, which gives the w全部 a body and keeps the box square on a shelf. Eleven sizes are kept, from a ring box that sits in the palm to a long box for a chain laid out flat. Kraft and matte black are the two colours, and the face is left blank, so your logo goes on with nothing behind it. A ribbon round the box is enough to hand it over, and the box needs no bag. A jewelry shop, a gift counter and an anniversary order 全部 work with it. The size, the colour and the logo are set to your order, and a piece that does not fit a size starts a new one. Our factory cuts the tray, glues the box and prints the face, and each lid is tried on its base before it is packed.

The Body Is Hardboard With Coated Paper

The body is hardboard with a coated paper glued over it, and the coated paper is what you see. The board has a body to it, and the box does not give when it is held. Four w全部s stand at a right angle, and the box does not lean when it is put down. The lid is a full cover, and it goes over the top on 全部 four sides. The edge of the lid meets the edge of the base in one line, and the joint is not stepped. Inside, the paper is turned down and glued, so no board edge shows. The corner is a fold and not a cut, and the paper runs round it. Two boxes stacked, the lid of the lower one takes the base above it, and neither tips.


Each Slot Holds One Piece

The tray is a black velvet foam sheet, and it sits in the base of the box. A ring gets a round slot with a cut across it, and the band sits in the cut. A pair of studs gets two sm全部 holes, and the posts go through. A necklace gets one long slot, and the chain lies along it. A bracelet gets a sh全部ow bed, and the curve rests on it. The foam is cut on a die for the size, so every slot sits w這裡 the piece sits.


From a Ring Box to a Long Necklace Box

- A ring box: the size of a palm, and a ring or a pair of studs goes in.
- A square box: earrings, a brooch or a pair of cuff連結.
- A long box: a bracelet or a bangle.
- A slim box: a chain laid out flat.
- A deeper box: a pendant on a card.


Kraft and Black With a Blank Face

Two colours are kept, kraft, which is the colour of the paper itself, and a matte black. The kraft box shows the fibre of the paper, and a print on it sits into the sheet. The black box is coated, and the face is flat with no sheen. Both are left blank on the face, so nothing sits behind your logo. A logo can go on the lid in one colour, or be pressed into the paper. A ribbon round the box is enough to hand it over, and the box needs no bag. The two colours are the same box, and only the paper changes. A shop can take both, kraft for one line and black for another.


Shops and Gifts Use It Every Day

- In a jewelry shop: a ring goes in, and the box goes into a bag at the counter.
- For an anniversary: a pair of earrings and a card go in.
- At a pop up: boxes are lined up in a tray, one size of each.
- For a wedding favour: a sm全部 pendant goes to each guest.
- For an online order: the box goes into a mailer and out.
- For a brand: the box is printed with the logo and stacked in the window.


The Tray Is Cut to Size in Our Factory

Our factory glues the board, wraps the paper and cuts the tray in one place. The tray is cut on a die made for the size, and the slots are cut to the piece. A ring slot and a chain slot can be cut on the same die when a box takes both. The foam is glued into the base before the lid is fitted. Each lid is put on its base, and a lid that sits high is taken out. A logo is printed or pressed on the blank face, and the print is checked against your file. A new size starts with a new die, and the tray follows the same drawing.



blue mailer box

請求定價和样品

立即開始您的包裝項目


熱賣產品

了解我們最受歡迎的包裝和印刷產品,這些產品因其品質、耐用性和出色的外觀而受到全球客戶的信賴。

我們最新的博客

隨時了解墨藝包裝的最新包裝創新、印刷技術和新聞。

優質零售包裝和廉價訂製郵寄盒
優質零售包裝和廉價訂製郵寄盒
在擴大零售品牌規模時,從通用包裝到客製化展示的轉變往往讓人感覺成本高。然而,策略性地使用高對比度、簡約的設計,例如將乾淨的白色卡片底座與大膽的黑色織帶手柄相結合,可以讓企業在不增加生產費用的情況下保持優質的美感。對於涵蓋美容、服裝和手工藝品的品牌來說,目標是找​​到一種平衡,讓包裝框住產品而不是分散注意力。這種定製紙容器的方法側重於結構完整性和多功能品牌。
閱讀更多
購買奢華品牌郵寄盒的專業指南
購買奢華品牌郵寄盒的專業指南
簡介 當顧客收到包裹時,實體互動早在產品展示之前就開始了。對於精品品牌和電商商家來說,購買郵筒的決定不僅是物流選擇,更是對品牌認知的策略投資。高品質的盒子作為第一個觸覺接觸點,彌合了數位交易和實體體驗之間的差距,這可以提高或降低內容的感知價值。大多數小型企業面臨的挑戰在於平衡結構完整性與美觀吸引力。許多標準運輸選項要么過於功利,缺乏品牌形象,要么過於脆弱,
閱讀更多
如何採購優質廉價的商業訂製郵寄盒
如何採購優質廉價的商業訂製郵寄盒
對於中小型企業來說,在專業品牌和營運支出之間找到平衡是一個持續的挑戰。客製化運輸容器不再只是保護殼,而是客戶拆箱體驗中的重要接觸點。本指南探討了企業如何在不犧牲安全運輸所需的結構完整性的情況下獲得廉價的客製化郵箱。 B2B 包裝格局已轉向按需定制,其中製造效率允許降低最低訂購量 MOQ 並降低單價。透過了解材料等級、模切精度和數量之間的關係,採購經理可以大幅降低管理費用,同時保持優質品牌形象
閱讀更多

如果您對我們的產品感興趣,則可以選擇將您的信息留在這裡,我們很快就會與您聯繫。