Multi-pattern Pre-assembled Oil-proof Burger Paper Box
Multi-pattern Pre-assembled Oil-proof Burger Paper Box
Multi-pattern Pre-assembled Oil-proof Burger Paper Box
Multi-pattern Pre-assembled Oil-proof Burger Paper Box
Multi-pattern Pre-assembled Oil-proof Burger Paper Box
Multi-pattern Pre-assembled Oil-proof Burger Paper Box

Multi-pattern Pre-assembled Oil-proof Burger Paper Box

The box body is already formed when it leaves the factory, you take it out of the carton and open it up, with no folding and no gluing. Inside is white core card with a layer of PE coated on it, so oil poured in gathers in one pool instead of soaking into the paper. An arch shaped opening is cut in the lid skirt, and the steam goes out through it, so the bun is not left sitting in its own moisture. The print on the box uses soy ink, the colour sits solid and the thin line drawings come out clean. 電話l me what to print and what size burger goes in, and I will give you the price.

No Folding Needed, the Box Stands Square 

The box body is already formed when it leaves the factory, and you take it out of the carton and open it up, with no folding and no gluing. At the lunch rush a stack sits within reach, you grab one, open it, set the burger in and close the lid, and your hands do not stop. The body stands up square with four right angles, the burger goes in, and the lid skirt comes down to the front of the body. The tab on the front goes into the slot, you feel it catch as it goes in, and the lid does not come open on its own when you lift the box. The paper is thickened white core card, the w全部 runs in one straight line from the mouth to the bottom, and it springs back when you pinch it. The bottom is flat, it does not rock on a stainless steel counter, and once it is filled it goes straight out to the customer. When it is done, the box is pressed flat, a stack goes into the paper bin, and it takes little room in the rubbish.


PE Coating Inside, Water and Oil Stay Out

- The inside: a layer of PE is coated on it, it feels smooth to the hand, not like the rough face of paper.
- Poured oil: oil poured in gathers in one pool, and the ring at the edge does not spread outwards.
- The juice: juice from under the burger runs to the bottom, and the paper does not go soft first.
- The corners: the four corners of the bottom are coated as well, not only the flat middle.
- The touch: you run a finger along the inside and no paper dust comes off on your hand.


Air Vents on the Box Let the Steam Out

An arch shaped opening is cut in the lid skirt, and with the lid closed the steam in the box goes out through it and the air outside comes in. A burger straight off the grill goes in, the steam is not trapped inside, and the bun does not soak soft and sink. The opening is cut on the plain side face, not on the printed face, so the print on the box is not affected.


It Carries Different Things in Different Shops 

- In a burger shop: one double burger goes in, the lid closes, and it is handed over standing up.
- In a fried chicken shop: two pieces of chicken and one drumstick, and the oil stays at the bottom without soaking through.
- In a light food shop: one sandwich and one bagel, and t這裡 is still room in the box.
- A delivery order: the lid is closed and the tab pushed in, it goes into the outer bag, and it does not come loose on the road.
- Eating in: the box goes straight on the tray, you lift the lid and eat, with no plate to look for.


Patterns, Logo and Text Can 全部 Be Printed

The box face can carry a logo, a pattern and text, printed on the front, on the sides and on the lid. T這裡 are more than ten ready patterns, red and gold festival prints, fried chicken, burger and simple line drawings among them, you pick one and use it as it is, or your own artwork is redrawn to fit. Both dark and light grounds have been printed, and red, blue, yellow, pink, green and white are 全部 among them.


The Steps the Factory Runs for This Burger Box

This box runs through the factory in this order, printing, PE coating, die cutting, creasing and gluing, and the last step is opening it into shape. The coating is done after printing, the film is pressed thin so oil does not hang on the inside; too thick and the lid closes tight, too thin and the oil soaks in. The die cutting and the creasing are on one set of dies, the cuts, the crease lines and the air vent come out in one pass, and the four corners are even once the box is opened. The soy ink is left to dry through, deep shades rub most easily, and a stack pressed on the printed face marks it, so the sheets are cooled before they are stacked. Every box is opened once by hand, and one that will not open or has a crooked lid skirt is pulled out. On bags the factory has made paper bags, handled bags, gift bags, wine bags, clothing bags and beauty bags, and on boxes it has made burger boxes, fried chicken boxes, flip lid boxes, lid and base boxes, fold flip boxes, tuck end boxes, mailer boxes, handled boxes, drawer boxes, book style boxes and jewelry boxes, with gold foil, logo printing and embossing 全部 done in house. A repeat order runs on the same dies and the same printed sheet kept on file, so the second batch lines up with the first.



blue mailer box

請求定價和样品

立即開始您的包裝項目


熱賣產品

了解我們最受歡迎的包裝和印刷產品,這些產品因其品質、耐用性和出色的外觀而受到全球客戶的信賴。

我們最新的博客

隨時了解墨藝包裝的最新包裝創新、印刷技術和新聞。

優質零售包裝和廉價訂製郵寄盒
優質零售包裝和廉價訂製郵寄盒
在擴大零售品牌規模時,從通用包裝到客製化展示的轉變往往讓人感覺成本高。然而,策略性地使用高對比度、簡約的設計,例如將乾淨的白色卡片底座與大膽的黑色織帶手柄相結合,可以讓企業在不增加生產費用的情況下保持優質的美感。對於涵蓋美容、服裝和手工藝品的品牌來說,目標是找​​到一種平衡,讓包裝框住產品而不是分散注意力。這種定製紙容器的方法側重於結構完整性和多功能品牌。
閱讀更多
購買奢華品牌郵寄盒的專業指南
購買奢華品牌郵寄盒的專業指南
簡介 當顧客收到包裹時,實體互動早在產品展示之前就開始了。對於精品品牌和電商商家來說,購買郵筒的決定不僅是物流選擇,更是對品牌認知的策略投資。高品質的盒子作為第一個觸覺接觸點,彌合了數位交易和實體體驗之間的差距,這可以提高或降低內容的感知價值。大多數小型企業面臨的挑戰在於平衡結構完整性與美觀吸引力。許多標準運輸選項要么過於功利,缺乏品牌形象,要么過於脆弱,
閱讀更多
如何採購優質廉價的商業訂製郵寄盒
如何採購優質廉價的商業訂製郵寄盒
對於中小型企業來說,在專業品牌和營運支出之間找到平衡是一個持續的挑戰。客製化運輸容器不再只是保護殼,而是客戶拆箱體驗中的重要接觸點。本指南探討了企業如何在不犧牲安全運輸所需的結構完整性的情況下獲得廉價的客製化郵箱。 B2B 包裝格局已轉向按需定制,其中製造效率允許降低最低訂購量 MOQ 並降低單價。透過了解材料等級、模切精度和數量之間的關係,採購經理可以大幅降低管理費用,同時保持優質品牌形象
閱讀更多

如果您對我們的產品感興趣,則可以選擇將您的信息留在這裡,我們很快就會與您聯繫。