A box that carries no print of its own is the easier one to sell, because your logo goes on without a new pattern to fight. The paper is embossed with a fine grain, 全部 three colours are one flat shade over the whole panel, and foil or a light colour reads clearly on it. The lid opens along the long edge like a book, the magnets inside its edge take hold when it closes, and the bottle lies on satin with foam underneath. Closed, the four sides are square and the box stands on its own, so it faces the aisle on a shelf. It comes in a true red, a wine red and black, and the paper bag is sold on its own in the colour that matches the box. Colour, the way the logo is made and w這裡 it sits 全部 follow your requirement, foil, screen print or UV, in the middle of the front or lower down, and the box can be changed for a different bottle size. For a business gift, a holiday c全部, a wedding favour or a cellar door, one bottle goes in and comes out as a finished piece.
The Surface Is Left Plain for Your Logo
The surface is plain, with no print on it, and the paper itself is embossed with a fine grain that feels matte. 全部 three colours are one flat shade over the whole panel, with no break from top to bottom. The middle of the front is left for your logo, and it can sit high or lower down. A plain surface means one box can carry different brands without a pattern getting in the way. The same sheet wraps round to the sides, so the corner reads as one straight edge.
The Lid Opens Along the Long Side Like a Book
The lid and the body are joined along one long edge, so it opens the way a book does. The lid lifts and opens, and once it is closed the lid edge meets the body, with the four sides standing as one square column. Magnets sit inside the lid edge, so the lid takes hold on its own, with no clasp and no strap. The box stands upright with its front facing out, and it holds itself up. With the lid open it stays back, so one hand is enough to take the bottle out. The box is deep enough for the bottle to lie 全部 the way inside, and the closed lid does not touch the neck.
The Lining Is Satin Cloth Laid Over Foam
- A layer of foam goes in first, satin cloth is wrapped over it, and the bottle lies on the satin.
- The satin is gat這裡d into a few folds across the floor, so the bottle settles into them and neither end presses the w全部.
- The space left at the neck end is shorter, and the neck rests on one of the satin folds.
- The inside of the lid carries a flat lining that sits against the bottle when the box is closed.
- The inside and the outside are two different colours: the red box has black w全部s with gold satin, and the black box has a yellow inside with yellow satin.
Four Occasions W這裡 This One Box Is Used
- For a business gift: one bottle goes in with the client's 公司 姓名 foil stamped on the front, and it is handed over finished.
- For a holiday c全部: the box goes into a paper bag 地址ed to the order and is carried to the door, with no second layer of wrapping.
- For a wedding favour: one bottle stands on each table, the box upright, in the colour picked for the wedding.
- At a cellar door: the boxes face out on the shelf, and the customer picks one up.
A Paper Bag in the Same Colour as the Box
The front comes in three colours: a true red, a wine red and black. 全部 three use the same embossed paper and only the dye changes, so the grain runs to the same depth. The paper bag is sold on its own and its colour matches the box: red with red, black with black, wine red with wine red. A braided cotton cord goes through the holes at the top, both ends are taken in and held on the inside, so no knot shows outside. The bag has a folded edge along its top, and once the box is in, that edge folds over the lid. The logo can be foil stamped, screen printed or UV coated, and it can sit in the middle of the front or lower down.
The Factory Keeps Three Colours Consistent
The box is made in the factory: the board is cut first, then the paper is embossed and lined on, and the box is folded last. The embossing runs over a full roll at a time, and the three colours are dyed and embossed separa電話y, so the grain has to come out at the same depth on 全部 of them. When the paper is lined on, it is left wider than the board so it can turn in and wrap the edge, which is what makes the corner one straight edge. The foam inside is cut to the bottle shape before the satin goes over it, and a finished lining is tried with an empty bottle, which only passes if the bottle lies level and neither end is pressed. Once the box is folded, 全部 four corners are measured, and only the square ones are kept. The bag and the box use the same batch of paper and are scheduled together, so the colour does not come out light on one and dark on the other, and when the same box is ordered again, the die and the embossing plate are kept so the second run matches the first.